Scaffolding · Teesside and the North East

Scaffold inspections and handovers, on the phone.

The seven-day inspection, the extra check after high winds, the handover to the principal contractor, and the tag on the lift. For a lot of scaffold firms around Teesside, that still lives in a book in the van. Then someone wants the last four weeks of inspections for a job in Middlesbrough, and the book is on another site.

  • Handover certificates on the phone
  • Inspections every 7 days, and after bad weather
  • Tubes, boards and fittings tracked between jobs

An illustration of the idea, not a screenshot from a real firm or a live client.

The problem

The inspection book should not live in the van.

Principal contractors and clients do not wait while someone drives back for a pad. The record needs to be against the job, the day it was done.

Handovers that never reach the office

The scaffold is handed over on site, the certificate is signed, and a copy stays in the van. When the principal contractor asks for it, someone is photographing a carbon copy in a lay-by.

The seven-day cycle slips

A busy week, a weekend of wind, and it is not obvious which lifts are due an inspection today. A whiteboard in the yard is only as good as the last person who updated it.

Weather and alteration checks get missed on paper

The statutory inspection is not only every seven days. After substantial alteration, or after adverse weather, there should be another check — and a record of it.

Stock that does not all come back

Boards, tubes, fittings, hop-ups and beams move from job to job. A short count at the end of a contract is hard to explain if nobody booked the gear out against a site.

How fittings, boards and tubes go missing

Checks and registers

The inspections and certificates a scaffold firm already runs.

Site Checks records the inspections and handovers you already do, using your own forms, in your logo and colours. It is not a design or TG20 calculation tool, and it does not replace a competent inspector's judgement.

Handover certificate

Record the handover when the scaffold is first handed over, signed on the phone, saved to the job, and ready if the principal contractor asks for a copy.

Statutory inspections

Log the inspection at least every seven days, with who inspected it, what they found, and any defects, against that scaffold and that site.

After weather or alteration

Add the extra inspection after adverse weather or a substantial alteration, so it sits in the same job file as the weekly checks.

Photos on the record

Add a photo of the tag, the lift or a defect if you want one on the file, instead of a separate camera roll that never gets filed.

Tubes, boards and fittings

Book gear out to a job and back in again, so a short return is visible and you are not guessing which site still has the missing bays.

A file you can export

The inspections and handovers for a job leave with you as a folder of standard files, any time — including if a client or a principal contractor wants the record.

The Work at Height Regulations 2005 require work equipment used for work at height, including scaffolding, to be inspected in certain situations. In practice that includes inspection after installation and before first use, at intervals of no more than 7 days, and after any event likely to have affected its strength or stability, such as alteration or severe weather.

Site Checks records the inspection or handover you complete. It does not replace a competent person’s judgement, it does not inspect the scaffold for you, and it is not a scaffold design or TG20 calculation tool. The legal duty stays with you.

Send a photo of one paper form. Get it back as an app form, free.

Email a photo of one of your paper handover or inspection sheets to hello@doddsworks.co.uk and I will put it back to you as an app form, free of charge, so you can see it in your colours before you decide anything.

Email a form photo
How it works

From the first handover to the weekly check.

01

Hand it over on the phone

Complete the handover certificate on site, signed, and saved to the job. The office can see it without waiting for the van to come in.

02

Inspect on the cycle

Do the seven-day inspection, and the extra checks after weather or alteration, on the same job. Due dates sit against that scaffold, not in a book in a different van.

03

Bring the gear back

Scan or book tubes, boards and fittings off the job so the next contract does not start with a short count and no idea where the stock went.

Open the Site Checks demo See equipment tracking

A live demo with made-up sample data, not a real scaffold firm. You can also open the equipment section to see how kit is tracked between jobs.

Site Checks holds the inspection and handover records. Equipment tracking, which is part of the same app, holds the stock that moves between jobs. Both are set up in your logo and brand colours. Send a photo of your current inspection or handover sheet and I will convert that first form free of charge.

See Site Checks
Prices

The same Site Checks plans. No extra product to buy.

Every plan includes the full app, including equipment tracking, and unlimited users. 15 users on 3 sites is £219 a month, with no per-user fees. There is no setup fee — we load your kit, people and jobs as part of getting started.

Starter

One site, or one yard and the jobs it serves.

£89/month

1 site · unlimited users

  • Equipment tracking included
  • The full Site Checks app
  • Unlimited users
Get a version in your colours
Most popular

Contractor

Up to three sites, for a firm running more than one job at a time.

£219/month

Up to 3 sites · unlimited users

  • Everything in Starter
  • Up to three live sites
  • Unlimited users
Get a version in your colours

Regional

Up to ten sites, for a firm covering a wider patch.

£499/month

Up to 10 sites · unlimited users

  • Everything in Contractor
  • Up to ten live sites
  • Unlimited users
Get a version in your colours

Plans run month to month after a three-month minimum, not twelve. No VAT added. The first three North East firms get a free 30-day pilot. After 30 days you can carry on at Starter for £71.20 a month for year one (20% off £89), or you can stop.

FAQ

Straight answers.

Something else on your mind? Email hello@doddsworks.co.uk and I will answer it.

Does this do TG20 or scaffold design?

No. Site Checks records the inspections and handovers you already do. It is not a design tool and it does not produce TG20 calculations. If you have a paper inspection or handover form, we put that form into the app.

Can the principal contractor see the records?

You can export a job as a folder of standard files (PDF and CSV) and send what they have asked for. The records are yours to share. We do not invent a client portal and claim they are already using it.

What about the tag on the lift?

If your current process includes a tag or a photo of the lift, that can sit on the inspection record. We follow the sheet you already use, rather than inventing a new one.

Is the app in our logo and colours?

Yes. Your version is set up in your logo and brand colours. It is your app to use, not a generic dashboard with our name all over it.

What does it cost?

Site Checks starts at £89 a month for one site, with no setup fee and unlimited users. Contractor is £219 for up to three sites, Regional is £499 for up to ten. Plans run month to month after a three-month minimum. The first three North East firms get a free 30-day pilot. After 30 days you can carry on at Starter for £71.20 a month for year one (20% off £89), or you can stop.

Get started

Get a scaffold version in your colours.

Email Curtis at hello@doddsworks.co.uk. Tell me how you do handovers and inspections today, and roughly how many sites you have on at once. You will get a proper reply by email, not a sales call.

Email about Site Checks
hello@doddsworks.co.uk
  • Your company name
  • How you do inspections and handovers today
  • How many sites you have on at once
  • A photo of one paper sheet, if you have one