Access equipment · Teesside and the North East

MEWPs and towers, with the checks that belong to them.

Scissor lifts, boom lifts and alloy towers move between jobs all week. A thorough examination is due and the certificate is in a folder in the office. The pre-use check was “done” but not written down. A tower went to a site in Darlington and has not come back. When you need the record, you need who used it, that it was checked that morning, and where it is now.

  • Pre-use checks on a MEWP or tower
  • Thorough-examination due dates on the machine
  • Which job each machine is on

An illustration of the idea, not a screenshot from a real firm or a live client.

The problem

The check and the certificate should sit with the machine.

Access equipment carries a morning check and a thorough examination. If either lives in a different folder from the machine, you only find the gap when someone asks.

Pre-use checks that were “done”

The operator looked over the machine. Nothing was written down. If something happens later that morning, there is no record that a check took place, or of a defect that was ignored.

Thorough examinations in an office folder

The LOLER thorough examination is up to date, or it is not, and the certificate is in a filing cabinet. The person sending the machine out cannot see the due date on the machine's own record.

A tower or a lift that has not come back

Alloy towers and small lifts move in vans and on short hires. Without a check-out to a job, a missing tower is a set of phone calls, not a line on a board.

How MEWPs and towers go missing or unbilled

A defective machine sent out again

A rail is bent, a gate will not latch, a warning light is on. If that is not flagged on the machine, it can leave the yard for the next job.

Checks and registers

The checks and dates that belong to a MEWP or a tower.

Site Checks records the pre-use check and the due dates you already manage. It does not replace a competent person's thorough examination, and it is not a training or operator-card scheme.

Pre-use check

Complete the morning check on a phone, against that scissor lift, boom or tower, before it is used. Defects are on the record, not only mentioned in the yard.

Thorough-examination due dates

Put the LOLER thorough-examination due date on the machine's record, so the desk can see it before the machine is booked out, not only once the certificate has expired.

Booked to a job and a person

Check the machine out to a site and to the person taking it, so you know who has it and where it is.

Do not use flags

Log damage or a fault, and mark the machine so it is not sent out again until it has been dealt with.

Check-in at the end of the hire

Scan or book it back in, with a note of any new damage, so the next pre-use check does not start from a blank page.

Your own form, in your colours

We put your current pre-use sheet into the app. The first paper form is converted free of charge.

Site Checks records the pre-use check and the due dates you enter. It does not replace a competent person's thorough examination under LOLER, and it does not replace operator training or a card scheme. The legal duty stays with you.

Send a photo of one paper form. Get it back as an app form, free.

Email a photo of one of your paper pre-use or inspection sheets to hello@doddsworks.co.uk and I will put it back to you as an app form, free of charge.

Email a form photo
How it works

Before it is used, and when it moves.

01

Check it, then book it out

The pre-use check is completed, and the machine is booked to a job. A due examination is visible before it leaves, not after.

02

Use it on the job

If a fault appears, it is logged against the machine. The office can see where every lift and tower is without ringing the site.

03

Bring it home

At the end of the hire or the job, check it in. Damage and defects travel with the machine, ready for the workshop and the next pre-use check.

Open the equipment demo Open the Site Checks demo

The equipment section of the Site Checks demo. Sample data only, not a real hire or contracting firm. Pre-use checks sit in the main Site Checks demo.

Pre-use checks live in Site Checks. The whereabouts of each machine, and its due dates, live in equipment tracking. It is one app, in your logo and brand colours, with no setup fee. Your records leave with you as a folder of standard files, any time.

See Site Checks
Prices

The same Site Checks plans. No extra product to buy.

Every plan includes the full app, including equipment tracking, and unlimited users. 15 users on 3 sites is £219 a month, with no per-user fees. There is no setup fee — we load your kit, people and jobs as part of getting started.

Starter

One site, or one yard and the jobs it serves.

£89/month

1 site · unlimited users

  • Equipment tracking included
  • The full Site Checks app
  • Unlimited users
Get a version in your colours
Most popular

Contractor

Up to three sites, for a firm running more than one job at a time.

£219/month

Up to 3 sites · unlimited users

  • Everything in Starter
  • Up to three live sites
  • Unlimited users
Get a version in your colours

Regional

Up to ten sites, for a firm covering a wider patch.

£499/month

Up to 10 sites · unlimited users

  • Everything in Contractor
  • Up to ten live sites
  • Unlimited users
Get a version in your colours

Plans run month to month after a three-month minimum, not twelve. No VAT added. The first three North East firms get a free 30-day pilot. After 30 days you can carry on at Starter for £71.20 a month for year one (20% off £89), or you can stop.

FAQ

Straight answers.

Something else on your mind? Email hello@doddsworks.co.uk and I will answer it.

Does this replace a LOLER thorough examination?

No. It records the due date and holds a copy if you upload the certificate. The examination itself still has to be done by a competent person. I will not describe the app as a substitute for that.

Do you issue operator cards or training?

No. If you already record who is trained to use a particular machine, that can sit on your forms. We do not run a training scheme and we are not a card issuer.

We hire MEWPs out, rather than using them on our own jobs. Is it still relevant?

Yes. The same needs apply: a pre-use check, a visible examination due date, a record of which customer or site has the machine, and a condition report when it comes back.

What does it cost?

Starter is £89 a month for one site or yard, Contractor is £219 for up to three, Regional is £499 for up to ten. Unlimited users, no setup fee, three-month minimum. The first three North East firms get a free 30-day pilot. After 30 days you can carry on at Starter for £71.20 a month for year one (20% off £89), or you can stop.

Get started

Get an access-equipment version in your colours.

Email Curtis at hello@doddsworks.co.uk. Tell me whether you hire MEWPs and towers out, use them on your own jobs, or both, and how you record pre-use checks today. You will get a proper reply by email, not a sales call.

Email about Site Checks
hello@doddsworks.co.uk
  • Your company name
  • Whether you hire out, use your own, or both
  • How you record pre-use checks today
  • A photo of one paper pre-use sheet, if you have one